ÑDz©ÌåÓý¹ÙÍøÊ×Ò³

MNRE releases draft solar cold storage design for input
POWER & RENEWABLE ENERGY

MNRE releases draft solar cold storage design for input

The Ministry of New and Renewable Energy (MNRE) has expressed its interest in receiving input from the public and stakeholders regarding the initial design specifications for solar cold storage (SCS).

It is intended that the storage capacity of the SCS, which ranges from 2 MT to 10 MT, be exclusively powered by solar photovoltaic as a distributed renewable energy source (DRE).

The determination of parameters for the SCS aims to facilitate installation at any site throughout India. The guidelines and specifications primarily focus on storage and preservation facilities within the temperature range of 4?C to 15?C, catering to both perishable and non-perishable commodities, such as fruits and vegetables.

The proposed specifications are designed to fulfill all CSC and cooling requirements as outlined in the National Horticulture Board standards.

The operational life of the SCS system is expected to be a minimum of 10 years from the date of commissioning.

In the SCS system, a solar module array is employed to convert irradiance into DC electrical energy, which powers the refrigeration unit. The DC power propels the refrigeration system, delivering cooling for products stored within a cold chamber.

The inclusion of a Maximum Power Point Tracker (MPPT) is deemed essential to optimize power utilisation from the module array, maximising input for the refrigeration unit and battery charging.

The controller, which is required to have protective features, must be housed in a cabinet with a minimum IP-65 protection rating. Adequate safeguards within the controller are imperative to ensure the protection of the solar cold storage system.

The Ministry of New and Renewable Energy (MNRE) has expressed its interest in receiving input from the public and stakeholders regarding the initial design specifications for solar cold storage (SCS). It is intended that the storage capacity of the SCS, which ranges from 2 MT to 10 MT, be exclusively powered by solar photovoltaic as a distributed renewable energy source (DRE). The determination of parameters for the SCS aims to facilitate installation at any site throughout India. The guidelines and specifications primarily focus on storage and preservation facilities within the temperature range of 4?C to 15?C, catering to both perishable and non-perishable commodities, such as fruits and vegetables. The proposed specifications are designed to fulfill all CSC and cooling requirements as outlined in the National Horticulture Board standards. The operational life of the SCS system is expected to be a minimum of 10 years from the date of commissioning. In the SCS system, a solar module array is employed to convert irradiance into DC electrical energy, which powers the refrigeration unit. The DC power propels the refrigeration system, delivering cooling for products stored within a cold chamber. The inclusion of a Maximum Power Point Tracker (MPPT) is deemed essential to optimize power utilisation from the module array, maximising input for the refrigeration unit and battery charging. The controller, which is required to have protective features, must be housed in a cabinet with a minimum IP-65 protection rating. Adequate safeguards within the controller are imperative to ensure the protection of the solar cold storage system.

Next Story
Infrastructure Transport

Dassault To Build Falcon Jets In India With Reliance

Reliance Infrastructure Ltd’s subsidiary, Reliance Aerostructure, has signed an agreement with France’s Dassault Aviation to manufacture Falcon 2000 business jets in India, with the first batch expected to roll out from its Nagpur facility by 2028. This marks the first time a Falcon aircraft will be entirely built outside France.The announcement sent Reliance Infrastructure shares surging, hitting the 5 per cent upper circuit on the BSE. Anil Ambani, Chairman of Reliance Group, hailed the agreement as a “symbol of India’s technological and manufacturing strength�, adding that it aims..

Next Story
Infrastructure Urban

INDEA Lays Foundation for India’s First Auto Design School

The Indian School for Design of Automobiles (INDEA), the country’s first institute focused solely on automobile design and management, held its foundation stone ceremony at XLRI Delhi-NCR. The event was graced by Union Minister for Road Transport and Highways, Nitin Gadkari, who virtually unveiled the stone as Chief Guest.INDEA aims to become a premier talent hub, driving innovation in the Indian automotive sector. The school will focus on advanced design, mobility solutions, and sustainable practices, playing a vital role in shaping India’s transition from a cost-driven to a quality-led a..

Next Story
Infrastructure Transport

Karnataka Launches Global Innovation Hub at Airport City

The Government of Karnataka, in collaboration with Bengaluru Airport City Limited (BACL) and ANSR, has launched a global innovation hub named District I at Bengaluru Airport City's business park. The initiative aims to elevate India’s innovation ecosystem to a global scale by fostering collaboration among startups, academia, enterprises, and government bodies.District I will serve as a platform for deep-tech entrepreneurship, enterprise innovation, and commercialisation of academic research. It brings together Global Capability Centres (GCCs), IT firms, corporate labs, startups, venture capi..

Advertisement

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

Advertisement

Advertisement

Advertisement