TN textile units with captive solar projects oppose ALMM directive
30 Aug 2024
2 Min Read
CW Team
Textile units in Tamil Nadu, equipped with solar projects for captive consumption, are opposing a recent directive from the Tamil Nadu Green Energy Corporation (TNGECL) that mandates the use of solar modules listed in the Approved List of Models and Manufacturers (ALMM). The Tamil Nadu Spinning Mills Association has urged the Ministry of New and Renewable Energy (MNRE) to withdraw this directive and has threatened legal action if their request is not met.
The Non-Conventional Energy Sources (NCES) wing of Tamil Nadu Generation and Distribution Corporation (TANGEDCO) recently mandated that only ALMM-approved solar modules can be used for solar projects that are to be commissioned, with grid tie-up approvals to be granted only after verification. Companies such as Kaiser Green Energy and Armstrong Spinning Mills were instructed by TNGECL to adhere to the ALMM-approved module requirement in their applications to wheel power for captive use under the Intra-state Open Access System.
The Spinning Mills Association has urged the MNRE Secretary to revoke the Chief Engineer-NCES?s directive and permit the importation of solar modules for private projects. They argue that the ALMM mandate should not apply to private entities, which rely heavily on captive solar power due to the unreliable power supply from distribution companies. The association?s chief advisor, K Venkatachalam, emphasised that the ALMM list was originally intended for government-related projects, but TANGEDCO has extended its restrictions to private companies as well. TANGEDCO has stated that entities not complying with the ALMM mandate will be denied connectivity.
The association warned that this measure could lead to significant financial losses for companies that have already placed orders for solar modules from other countries. Many companies are at various stages of establishing captive solar projects, with some imports stuck at Indian ports and others ready to be installed after clearing import duties.
Textile units prefer importing solar modules due to their cost efficiency and higher performance. The textile industry, which accounts for 75% of installed renewable energy capacity in Tamil Nadu, argues that relying on domestic procurement would increase costs by nearly 30%.
However, a senior NCES official maintained that the ALMM mandate applies to both private and government entities. "There was a temporary exception for private entities, but as of April 1, 2024, the mandate applies universally. We are enforcing this order in accordance with MNRE regulations," the official stated.
(Mercom)
Textile units in Tamil Nadu, equipped with solar projects for captive consumption, are opposing a recent directive from the Tamil Nadu Green Energy Corporation (TNGECL) that mandates the use of solar modules listed in the Approved List of Models and Manufacturers (ALMM). The Tamil Nadu Spinning Mills Association has urged the Ministry of New and Renewable Energy (MNRE) to withdraw this directive and has threatened legal action if their request is not met.
The Non-Conventional Energy Sources (NCES) wing of Tamil Nadu Generation and Distribution Corporation (TANGEDCO) recently mandated that only ALMM-approved solar modules can be used for solar projects that are to be commissioned, with grid tie-up approvals to be granted only after verification. Companies such as Kaiser Green Energy and Armstrong Spinning Mills were instructed by TNGECL to adhere to the ALMM-approved module requirement in their applications to wheel power for captive use under the Intra-state Open Access System.
The Spinning Mills Association has urged the MNRE Secretary to revoke the Chief Engineer-NCES?s directive and permit the importation of solar modules for private projects. They argue that the ALMM mandate should not apply to private entities, which rely heavily on captive solar power due to the unreliable power supply from distribution companies. The association?s chief advisor, K Venkatachalam, emphasised that the ALMM list was originally intended for government-related projects, but TANGEDCO has extended its restrictions to private companies as well. TANGEDCO has stated that entities not complying with the ALMM mandate will be denied connectivity.
The association warned that this measure could lead to significant financial losses for companies that have already placed orders for solar modules from other countries. Many companies are at various stages of establishing captive solar projects, with some imports stuck at Indian ports and others ready to be installed after clearing import duties.
Textile units prefer importing solar modules due to their cost efficiency and higher performance. The textile industry, which accounts for 75% of installed renewable energy capacity in Tamil Nadu, argues that relying on domestic procurement would increase costs by nearly 30%.
However, a senior NCES official maintained that the ALMM mandate applies to both private and government entities. There was a temporary exception for private entities, but as of April 1, 2024, the mandate applies universally. We are enforcing this order in accordance with MNRE regulations, the official stated.
(Mercom)
Next Story
Dassault To Build Falcon Jets In India With Reliance
Reliance Infrastructure Ltd’s subsidiary, Reliance Aerostructure, has signed an agreement with France’s Dassault Aviation to manufacture Falcon 2000 business jets in India, with the first batch expected to roll out from its Nagpur facility by 2028. This marks the first time a Falcon aircraft will be entirely built outside France.The announcement sent Reliance Infrastructure shares surging, hitting the 5 per cent upper circuit on the BSE. Anil Ambani, Chairman of Reliance Group, hailed the agreement as a “symbol of India’s technological and manufacturing strength�, adding that it aims..
Next Story
INDEA Lays Foundation for India’s First Auto Design School
The Indian School for Design of Automobiles (INDEA), the country’s first institute focused solely on automobile design and management, held its foundation stone ceremony at XLRI Delhi-NCR. The event was graced by Union Minister for Road Transport and Highways, Nitin Gadkari, who virtually unveiled the stone as Chief Guest.INDEA aims to become a premier talent hub, driving innovation in the Indian automotive sector. The school will focus on advanced design, mobility solutions, and sustainable practices, playing a vital role in shaping India’s transition from a cost-driven to a quality-led a..
Next Story
Karnataka Launches Global Innovation Hub at Airport City
The Government of Karnataka, in collaboration with Bengaluru Airport City Limited (BACL) and ANSR, has launched a global innovation hub named District I at Bengaluru Airport City's business park. The initiative aims to elevate India’s innovation ecosystem to a global scale by fostering collaboration among startups, academia, enterprises, and government bodies.District I will serve as a platform for deep-tech entrepreneurship, enterprise innovation, and commercialisation of academic research. It brings together Global Capability Centres (GCCs), IT firms, corporate labs, startups, venture capi..