ÑDz©ÌåÓý¹ÙÍøÊ×Ò³

Mapei offers the complete system for LVT installationThe different technical aspects of LVT available in the market offer glue-down, click-connect, loose-lay or stick down solutions, which are a real help for the client and the designer, when it comes to the actual fitting that is required. In short, the LVT collections available really do provide an application to suit everybody.Technical supportMapei has always had a keen eye on the requirements of new design trends and proposes a complete range of systems, which technically support and complete the installation of LVT â€� solutions that fulfil the need to guarantee reliable, long-lasting installation systems in compliance with the principles of certified eco-sustainability, with full respect for international programmes aimed at safeguarding the environment and our health.Mapei’s Ultrabond Eco 4 LVT for use on floors and walls in interior applications are suitable on: Level, absorbent substrates; and underfloor heating systems. Improved by the addition of fibres, therefore, particularly suitable for heavy wear use in domestic, commercial and industrial locations, such as hospitals, shopping centres, airports, etc). It is also available for laying LVT on walls. It can be used for the installation of flooring subjected to stresses from chair castors according to EN 12529.Fibre-reinforced adhesive specific for LVTHighly shear resistant, hard set, wet-bed dispersion adhesive, specific for LVT flooring. One of its component: Silicate-polymer-based adhesive for LVT. Modern, one-component reactive adhesive made from silylated polymers specifically developed to bond LVT and replace conventional two-component reactive adhesives in all areas where this type of flooring is installed. Very tough and highly resistant to shear loads, which makes it particularly suitable for floors exposed to direct sunlight, intense mechanical stress due to forklifts, etc, or which are constantly exposed to water (communal kitchens, showers, etc). It is also available in the Thixotropic version (Ultrabond Eco MS 4 LVT/WALL) for laying LVT on walls.Product propertiesVery easy to apply Low to no waiting time Excellent wetting of LVT backings Fibre-reinforced Very good peel strength High resistance to indentation High shear resistance Very good dimensional stability Prevents open joints Exposure to castor wheels in compliance with EN 12529 Solvent-free EMICODE EC1 Plus (very low emission) Blauer Engel - RAL UZ113 Harmless to the health of the installer and the end-user.(Communication by the management of the company)