Hitachi launches ZW100-6 wheel loader for lighter applications
12 Nov 2021
3 Min Read
CW Team
Hitachi鈥檚 new ZW100-6 is a small, yet powerful wheel loader well-suited for lighter jobs, comprising earthmoving, excavation, landscaping, and utility work.
With a working weight of 17,042 pounds, the loader is powered by a Deutz engine rendering 101 horsepower and 9,680 pounds of breakout force. The engine satisfies Tier 4 Final emissions needs via a particular catalytic reduction system that inserts urea into exhaust gas to decrease nitrous-oxide from emissions and eradicates the requirement for a diesel particulate filter.
Hitachi says that the engine additionally highlights a quick power switch that enhances engine output when needed or when driving upward.
Bucket capacity on the ZW100-6 is 1.4 cubic yards, and the machine has a maximum hinge pin height of 11 ft 6 in.
A hydrostatic transmission control system makes the machine simpler to manoeuvre. Operators can pick between two work modes based on the terrain and task. The firm says that the oscillating rear axle renders more stability and traction than loaders with a fixed axle. When operating in wet or slippery conditions, torque proportioning differentials assist in avoiding tire slippage, limiting wear and fuel waste. The ride-control feature reduces machine pitching for a smoother ride and decreases bucket material spillage.
As against earlier models, the ZW100-6 uses 6% less fuel during V-shape loading and 19% less fuel during travelling works. Fuel waste is decreased through the standard auto-idle shutdown.
The ZW100-6 provides a clear picture of the job site with 360-degree visibility from the cab. The repositioned muffler and air intake enhance visibility out the back window. The curved engine hood further improves visibility and safety. Advanced insulation in the cab decreases noise levels, preparing for a quieter work environment.
An easy-to-open wide engine cover enables easy access for ground-level maintenance. The engine air filter has been relocated to the rear of the engine section. The reinforced front frame emphasises heavy-duty axles, designed in-house for increased durability. An optional belly guard can be added to preserve the powertrain and driveshaft.
The ZW100-6 is additionally equipped with Hitachi鈥檚 Global e-Service for 24/7 remote monitoring of machine performance. The firm's ConSite program gives automated monthly service reports on daily working hours and fuel consumption data, statistics on the operating mode ratio, and comparison for fuel consumption or efficiency and emissions.
After including the new ZW100-6, the Hitachi ZW-6 wheel loader lineup now has 15 models.
Also read: JLG launches self-levelling boom lift JLG 670SJ
Hitachi鈥檚 new ZW100-6 is a small, yet powerful wheel loader well-suited for lighter jobs, comprising earthmoving, excavation, landscaping, and utility work.
With a working weight of 17,042 pounds, the loader is powered by a Deutz engine rendering 101 horsepower and 9,680 pounds of breakout force. The engine satisfies Tier 4 Final emissions needs via a particular catalytic reduction system that inserts urea into exhaust gas to decrease nitrous-oxide from emissions and eradicates the requirement for a diesel particulate filter.
Hitachi says that the engine additionally highlights a quick power switch that enhances engine output when needed or when driving upward.
Bucket capacity on the ZW100-6 is 1.4 cubic yards, and the machine has a maximum hinge pin height of 11 ft 6 in.
A hydrostatic transmission control system makes the machine simpler to manoeuvre. Operators can pick between two work modes based on the terrain and task. The firm says that the oscillating rear axle renders more stability and traction than loaders with a fixed axle. When operating in wet or slippery conditions, torque proportioning differentials assist in avoiding tire slippage, limiting wear and fuel waste. The ride-control feature reduces machine pitching for a smoother ride and decreases bucket material spillage.
As against earlier models, the ZW100-6 uses 6% less fuel during V-shape loading and 19% less fuel during travelling works. Fuel waste is decreased through the standard auto-idle shutdown.
The ZW100-6 provides a clear picture of the job site with 360-degree visibility from the cab. The repositioned muffler and air intake enhance visibility out the back window. The curved engine hood further improves visibility and safety. Advanced insulation in the cab decreases noise levels, preparing for a quieter work environment.
An easy-to-open wide engine cover enables easy access for ground-level maintenance. The engine air filter has been relocated to the rear of the engine section. The reinforced front frame emphasises heavy-duty axles, designed in-house for increased durability. An optional belly guard can be added to preserve the powertrain and driveshaft.
The ZW100-6 is additionally equipped with Hitachi鈥檚 Global e-Service for 24/7 remote monitoring of machine performance. The firm's ConSite program gives automated monthly service reports on daily working hours and fuel consumption data, statistics on the operating mode ratio, and comparison for fuel consumption or efficiency and emissions.
After including the new ZW100-6, the Hitachi ZW-6 wheel loader lineup now has 15 models.
Image Source
Also read: JLG launches self-levelling boom lift JLG 670SJ
Next Story
Lack of Bidders Stalls VOC Port鈥檚 Rs 70.56 Bn Harbour Project Again
The VOC Port Authority鈥檚 Rs 70.56 billion outer harbour project has once again faced a setback, with the latest tender process cancelled due to the absence of qualified bidders. This marks the second failed attempt to secure participation for the mega infrastructure initiative.The tender has reportedly been withdrawn from the active list of bids, and the authority is now expected to re-evaluate and possibly restructure the project to enhance its appeal to potential developers.The port authority had initially floated the Request for Proposal (RFP) in December 2024, following the cancellation ..
Next Story
Sea Lord Containers Opens Cryogenic LPG Terminal in Mangalore
Sea Lord Containers (SCL), a wholly-owned subsidiary of Aegis Logistics, has commissioned a new cryogenic Liquified Petroleum Gas (LPG) terminal in Mangalore. The facility, which became operational on 12 June 2025, offers a static storage capacity of 82,000 metric tons (MT), significantly strengthening the region鈥檚 LPG logistics infrastructure.The terminal was developed by SCL on behalf of Aegis Vopak Terminals, an associate company of Aegis Logistics. The asset is expected to be transferred to Aegis Vopak Terminals Limited at a later date, with formal updates to be shared separately with st..
Next Story
Cochin Port and Oil India Partner for Offshore Exploration Support
The Cochin Port Authority (CoPA) has signed a Memorandum of Understanding (MoU) with Oil India (OIL) to establish a shore base facility supporting offshore oil exploration in the Kerala-Konkan Basin. The agreement was formalised at a ceremony held at CoPA, Willingdon Island, on 12 June 2025, in the presence of senior officials from both organisations.Under the partnership, Cochin Port will provide critical logistics infrastructure for OIL鈥檚 offshore drilling operations, expected to begin later in 2025. The planned shore base will include a dedicated warehouse, dry bulk handling plant, and an..
