MoRTH asks road construction companies to use fly-ash in construction
29 Jul 2021
2 Min Read
CW Team
For the construction of flyover embankments, the Ministry of Road Transport and Highways (MoRTH) has asked construction companies to promote fly-ash bricks, blocks, and tiles. According to the most recent circular, fly-ash can be used in road construction as long as it meets the Indian Road Congress's standards and specifications.
The disposal and use of ash produced by thermal power plants have become a pressing and urgent task. In many ways, using fly-ash in construction will be a long-term solution.
The circular also stated that the country generates a lot of fly ash, and a lot of it isn't used, which is a big problem for the environment. This can also be harmful to one's health. In addition to taking up a lot of space, unutilised fly-ash takes up a lot of lands.
The increased reliance on thermal power over the years has left a huge hillock of fly-ash at the thermal stations in Karnataka, according to the media. As a result, there was a shortage of available space. The energy department of the state proposed using a variety of technologies to use fly-ash in construction.
Within a hundred km of coal or lignite-based thermal power plant, the cost of transportation of ash for road construction projects, manufacturing of ash-based products, or use as a soil conditioner in agriculture activity shall be borne by the coal or lignite-based thermal power plant, according to the circular.
It went on to say that transportation costs beyond a radius of a few hundred kilometres, up to 300 km, should be split evenly between the user and the coal or lignite-based thermal power plant.
Specifications for the use of fly ash in two, four, and six lane highways, among other things, have been issued by MoRTH. The use of fly-ash for embankment construction is permitted under Section 305 of the Ministry's Specifications for road and bridge works.
Also read: Environment ministry instructs NHAI to use fly ash for road construction
For the construction of flyover embankments, the Ministry of Road Transport and Highways (MoRTH) has asked construction companies to promote fly-ash bricks, blocks, and tiles. According to the most recent circular, fly-ash can be used in road construction as long as it meets the Indian Road Congress's standards and specifications.
The disposal and use of ash produced by thermal power plants have become a pressing and urgent task. In many ways, using fly-ash in construction will be a long-term solution.
The circular also stated that the country generates a lot of fly ash, and a lot of it isn't used, which is a big problem for the environment. This can also be harmful to one's health. In addition to taking up a lot of space, unutilised fly-ash takes up a lot of lands.
The increased reliance on thermal power over the years has left a huge hillock of fly-ash at the thermal stations in Karnataka, according to the media. As a result, there was a shortage of available space. The energy department of the state proposed using a variety of technologies to use fly-ash in construction.
Within a hundred km of coal or lignite-based thermal power plant, the cost of transportation of ash for road construction projects, manufacturing of ash-based products, or use as a soil conditioner in agriculture activity shall be borne by the coal or lignite-based thermal power plant, according to the circular.
It went on to say that transportation costs beyond a radius of a few hundred kilometres, up to 300 km, should be split evenly between the user and the coal or lignite-based thermal power plant.
Specifications for the use of fly ash in two, four, and six lane highways, among other things, have been issued by MoRTH. The use of fly-ash for embankment construction is permitted under Section 305 of the Ministry's Specifications for road and bridge works.
Image Source
Also read: Environment ministry instructs NHAI to use fly ash for road construction
Next Story
LANXESS Resin Removes Short-Chain PFAS From Water
Speciality chemicals company LANXESS has launched Lewatit MDS TP 108, a new ion exchange resin designed for the efficient removal of short-chain per- and polyfluoroalkyl substances (PFAS) from water. These PFAS compounds鈥攃haracterised by having three or fewer carbon atoms鈥攁re among the smallest and most challenging to eliminate through conventional water purification methods.Lewatit MDS TP 108 marks a significant advancement in the treatment of contaminated water, particularly where traditional technologies such as activated carbon adsorption fall short. The new resin offers a service life..
Next Story
Fujifilm Unveils LTO-10 Tape With 75TB Storage
FUJIFILM India, a wholly owned subsidiary of FUJIFILM Holdings Corporation, Tokyo, has launched the 鈥淔UJIFILM LTO Ultrium 10 Data Cartridge鈥� (LTO-10), a magnetic data storage solution offering a maximum recording capacity of 75 terabytes (30 terabytes uncompressed) per cartridge. This product is designed to provide secure, long-term, and cost-effective data storage for enterprises facing rising volumes of critical information.Commenting on the launch, Mr Koji Wada, Managing Director, FUJIFILM India, stated, 鈥淎t FUJIFILM India, we are committed to delivering innovative products that embod..
Next Story
India鈥檚 Largest Multi Modal Cargo Terminal Opens at Manesar
India鈥檚 largest multi-modal cargo terminal under the Gati Shakti initiative has been unveiled in Manesar, Haryana. This state-of-the-art facility integrates rail and road logistics to streamline freight movement and significantly reduce transportation hassles for businesses across the region.The terminal features expansive storage yards, modern handling equipment for containers, and seamless connectivity to major highways and rail lines. It is designed to cater to a wide range of commodities鈥攆rom bulk goods to manufactured products鈥攕upporting both road and rail operators through centrali..
