ÑDz©ÌåÓý¹ÙÍøÊ×Ò³

IOCL floats tender for a 1 MW solar project in Jaipur
POWER & RENEWABLE ENERGY

IOCL floats tender for a 1 MW solar project in Jaipur

Indian Oil Corporation Ltd (IOCL) has invited bids for a 1 MW grid-connected captive solar power project with the net metering facility at Rajasthan's Jaipur terminal.

The successful bidder will have to look after the operation and maintenance of the solar power project for four years.

The estimated cost of the project is Rs 46.07 million.

The last date to submit the bids for the project is July 11, 2022. Bids for the project will be opened on the following day.

The successful bidder will have to provide an amount of 3% of the work order value as a security deposit.

The solar modules presented should not degrade over 2.5% for the first year and not over 0.7% from the second year of its rated power. During the first ten years and the whole life span of 25 years, the solar modules should not degrade over 10% and 20% of their rated power, respectively.

If the project is not started on time, the contractor will have to pay a 0.5% penalty per week of delay or part thereof, subject to a 10% maximum.

The contractor should guarantee the successful applicability of the net-metering facility as per the technical needs. Under standard testing conditions, the peak power rating of the solar modules should not be less than 330 Watt (W), and the efficiency of the solar modules should not be less than 17.5%.

The solar modules should perform well in relative humidity up to 90% with working temperatures ranging in between -10°C and +85°C and resist wind speed on the panel’s surface per site-specific needs.

The solar module frame should be created of anodised aluminium or corrosion-resistant material frame, which should be electrolytically compatible with the structural material utilised for mounting the modules with an adequate number of grounding installations. The anodising thickness of the solar module should be 15 microns or more.

Each module utilised in the solar power project must be warranted for its output peak watt capacity, which should not be less than 90% at the 10-year-end and 80% at the 25-year end from the fulfilment of the trial run. IOCL invited bids for the annual operation and maintenance of 1.001 MW distributed solar systems installed at the Paradip refinery and township in Odisha recently.

Earlier, IOCL had invited bids for the Engineering, procurement, and construction (EPC) of a grid-connected captive solar project of 1.2 MW capacity with a net metering facility at its LPG bottling plant at Sanand in the Ahmedabad district.


Also read: Indian Oil issues tender for a 2.25 MW solar project

Indian Oil Corporation Ltd (IOCL) has invited bids for a 1 MW grid-connected captive solar power project with the net metering facility at Rajasthan's Jaipur terminal. The successful bidder will have to look after the operation and maintenance of the solar power project for four years. The estimated cost of the project is Rs 46.07 million. The last date to submit the bids for the project is July 11, 2022. Bids for the project will be opened on the following day. The successful bidder will have to provide an amount of 3% of the work order value as a security deposit. The solar modules presented should not degrade over 2.5% for the first year and not over 0.7% from the second year of its rated power. During the first ten years and the whole life span of 25 years, the solar modules should not degrade over 10% and 20% of their rated power, respectively. If the project is not started on time, the contractor will have to pay a 0.5% penalty per week of delay or part thereof, subject to a 10% maximum. The contractor should guarantee the successful applicability of the net-metering facility as per the technical needs. Under standard testing conditions, the peak power rating of the solar modules should not be less than 330 Watt (W), and the efficiency of the solar modules should not be less than 17.5%. The solar modules should perform well in relative humidity up to 90% with working temperatures ranging in between -10°C and +85°C and resist wind speed on the panel’s surface per site-specific needs. The solar module frame should be created of anodised aluminium or corrosion-resistant material frame, which should be electrolytically compatible with the structural material utilised for mounting the modules with an adequate number of grounding installations. The anodising thickness of the solar module should be 15 microns or more. Each module utilised in the solar power project must be warranted for its output peak watt capacity, which should not be less than 90% at the 10-year-end and 80% at the 25-year end from the fulfilment of the trial run. IOCL invited bids for the annual operation and maintenance of 1.001 MW distributed solar systems installed at the Paradip refinery and township in Odisha recently. Earlier, IOCL had invited bids for the Engineering, procurement, and construction (EPC) of a grid-connected captive solar project of 1.2 MW capacity with a net metering facility at its LPG bottling plant at Sanand in the Ahmedabad district. Image Source Also read: Indian Oil issues tender for a 2.25 MW solar project

Next Story
Infrastructure Transport

Dassault To Build Falcon Jets In India With Reliance

Reliance Infrastructure Ltd’s subsidiary, Reliance Aerostructure, has signed an agreement with France’s Dassault Aviation to manufacture Falcon 2000 business jets in India, with the first batch expected to roll out from its Nagpur facility by 2028. This marks the first time a Falcon aircraft will be entirely built outside France.The announcement sent Reliance Infrastructure shares surging, hitting the 5 per cent upper circuit on the BSE. Anil Ambani, Chairman of Reliance Group, hailed the agreement as a “symbol of India’s technological and manufacturing strength�, adding that it aims..

Next Story
Infrastructure Urban

INDEA Lays Foundation for India’s First Auto Design School

The Indian School for Design of Automobiles (INDEA), the country’s first institute focused solely on automobile design and management, held its foundation stone ceremony at XLRI Delhi-NCR. The event was graced by Union Minister for Road Transport and Highways, Nitin Gadkari, who virtually unveiled the stone as Chief Guest.INDEA aims to become a premier talent hub, driving innovation in the Indian automotive sector. The school will focus on advanced design, mobility solutions, and sustainable practices, playing a vital role in shaping India’s transition from a cost-driven to a quality-led a..

Next Story
Infrastructure Transport

Karnataka Launches Global Innovation Hub at Airport City

The Government of Karnataka, in collaboration with Bengaluru Airport City Limited (BACL) and ANSR, has launched a global innovation hub named District I at Bengaluru Airport City's business park. The initiative aims to elevate India’s innovation ecosystem to a global scale by fostering collaboration among startups, academia, enterprises, and government bodies.District I will serve as a platform for deep-tech entrepreneurship, enterprise innovation, and commercialisation of academic research. It brings together Global Capability Centres (GCCs), IT firms, corporate labs, startups, venture capi..

Advertisement

Advertisement

Subscribe to Our Newsletter

Get daily newsletters around different themes from Construction world.

STAY CONNECTED

Advertisement

Advertisement

Advertisement

Advertisement